BEST BWPG | Automatic Washing And Combining Line,


Automatic Washing And Combining Line With Servo Motor Driven - Gas Filling Press

It is used for washing, drying glasses, automatic assembling, pressing and gas filling with servo system.


  • • Control of the whole line from one screen
  • • Ability of working manually
  • • Special design for conveyor wheels to move heavy glasses
  • • Brush shafts are balanced against vibration
  • • Individual spindles for each brushes
  • • First brush can be disabled while processing coated(low-e)glasses
  • • Self adjustment system for glass thickness (max. 19 mm)
  • • Easy cleanable water nozzles are positioned with a wide angle for drag effect
  • • Wiper rubbers and brushes between sections in the washing unit
  • • Water level control with magnetic safety sensors
  • • Automatic water support system with float control
  • • Stainless water filters
  • • Valve system for energy saving when there is no glass in the drying unit
  • • Stopping of spindles and pumps when there is no glass in the washing unit
  • • Conveyor system without touching to side carrier wheels at drying section
  • • Drying unit with noise isolation and fan cabinet with temperature control
  • • Outlet conveyor system with variable speed
  • • Height and depth adjustable side and lower supports at spacer bar assemby unit
  • • Movement of 3 individual servo motor driven axes ( reference point positioning, level adjusting, assembling )
  • • Ability of manufacturing double and triple glasses automatically
  • • Ability of assembling IG units which are wider than the press unit
  • • Special anti static, corrosion-resistant and dustproof laminated cover over the press unit
  • • Air-cushion system at beside of press unit
  • • Thickness control of combined IG unit from four point with high accuracy ball screws
  • • Automatically adjustable press power and vacuum layer system according to glass size
  • • Spacer bar assembling unit with height and depth adjustment
  • • 40 cm clearance between panels for maintenance
  • High performance provided by 7,5 kW electric spindle (S1) and 12 position tool magazine make possible to diversify working with great flexibility
  • Axes slide on precision profile guides with ball screw and are driven by servo motors operated by state of the art servo-drive systems
  • Work piece clamp bars slide on precision linear guide rails
  • Working area can be divided in two zones so that two separate working stations can be utilized
  • By using the disc cutter, it is possible to carry out end-milling operations on both the ends of the work piece (end-milling cycle)
  • Milling operations are performed with linear and circular interpolation of the X-Y-Z axes
  • Pneumatically operated flip type length stops
  • Tool magazine is mounted on the mobile upright beam and travels with it. This allows a quick tool change operation during machining
  • Tool cooling is done through a central system that optimises the required lubrication
  • All slide ways and ball screws are lubricated through an automatic central lubrication system
  • A set of chip collector bins - standard
  • Optional motorized chip conveyor